Tire Repair Rubber StripIt Is A Tool Used For Quickly Repairing Tire Leaks, Usually Used For Vacuum Tires Or Tubeless Tires. It Uses Its Flexibility And Viscosity To Form A Seal By Inserting Into The Damaged Tire Area, Thereby Preventing Gas Leakage. Tire Repair Rubber Strip Is A Commonly Used Tool For Emergency Tire Repair, Especially Suitable For Small Punctures Or Nail Punctures.

Operation Steps:

Find The Damaged Location: Park The Vehicle In A Safe Location, Use A Pressure Gauge To Check The Tire Pressure, And Locate The Leak Point.

Clean The Damaged Area: Use A Tool Knife Or Sandpaper To Remove Foreign Objects From The Damaged Area, Ensuring That The Surrounding Area Of The Wound Is Clean.

Expand The Hole: Use A Conical Tool (such As A Tire Repair Probe) To Insert Into The Hole And Gently Rotate It To Appropriately Enlarge The Aperture For Easy Insertion Of The Rubber Strip.

Insert Rubber Strip:

Cut One End Of The Rubber Strip At An Oblique Angle For Easy Insertion.

Insert The Rubber Strip Into The Front Hole Of The Specialized Tool (such As A Plug), Ensuring That The Lengths Of Both Ends Are Roughly Equal.

After Applying The Special Adhesive, Insert The Rubber Strip Into The Tire Hole To Ensure Sufficient Insertion Depth (usually About 2/3 Of The Length).

Inspection And Pruning:

After Pulling Out The Tool, Check If The Rubber Strip Is Secure.

Use A Tool Knife To Cut Off Excess Parts And Make The Tire Surface Flat.

Inflation And Inspection: Inflate The Tire To The Appropriate Pressure And Check For Any Air Leaks.

Tags:

Wheel Balance Block

Hook Type Balance Block

Hook Type Balance Block

Tire Balance Pliers